How does the Jaw Crusher Use and Operate ?
The structure of jaw crusher: main frame, eccentric shaft, a large belt pulley, fly wheel, swing jaw, side guard plate, toggle plate, Rear bracket, adjust gap screw, reset spring, and fixed jaw and swing jaw board etc., and the toggle plate also plays a role of protection.So we can say that the structure of jaw crusher is relatively more simple as compared with other types of stone crusher. And it is useful to crusher all sizes and all kind of materials. With the excellent performance, it is important for construction and mining industry.
Due to the simple structure, jaw crusher is easy to maintain and repair. These features promote its popularity to a great extant.Even the jaw crusher is made from selected materials, the wear is inevitable. The operators should be aware of how to inspect the worn parts and how to replace them. When it comes to the purchase of parts of jaw crusher, your loca retail stores would be able to meet your requirements since the crusher is so popular. The operation is not so difficult, even though the jaw crusher seems to be heavy and ponderous. While being operated by qualified operators, the movement of jaw crusher seems to be flexible and convenient.
Its operations are as following:
First, after the start, if the crusher makes unusual knock, you should stop the machine. After identifying and eliminating the ills, you can restart the machine.
Second, the crusher must start without load. After the normal operation, you can open the mining equipment. The feeding ore should be increased gradually.
Third, the feeding should be even. The ore is not allowed to pack with the crushing chamber. The maximum size of the feeding ore should not be more that 0.85 times greater of the width of the feeding mouth.
Forth, in the operation of the crusher, when too much ore blocks the crushing cavity, do not stop the machine. You should stop feeding ore. You should regularly check the crushing cavity. Fifth, do not immediately stop the machine when the temperature of the bearing is too high. At this time, you should increase the amount of oil.
jaw crusher: http://www.milling-equipment.com/
stone crusher: http://www.crushing-mill.com/sand-crusher-machine.html
Due to the simple structure, jaw crusher is easy to maintain and repair. These features promote its popularity to a great extant.Even the jaw crusher is made from selected materials, the wear is inevitable. The operators should be aware of how to inspect the worn parts and how to replace them. When it comes to the purchase of parts of jaw crusher, your loca retail stores would be able to meet your requirements since the crusher is so popular. The operation is not so difficult, even though the jaw crusher seems to be heavy and ponderous. While being operated by qualified operators, the movement of jaw crusher seems to be flexible and convenient.
Its operations are as following:
First, after the start, if the crusher makes unusual knock, you should stop the machine. After identifying and eliminating the ills, you can restart the machine.
Second, the crusher must start without load. After the normal operation, you can open the mining equipment. The feeding ore should be increased gradually.
Third, the feeding should be even. The ore is not allowed to pack with the crushing chamber. The maximum size of the feeding ore should not be more that 0.85 times greater of the width of the feeding mouth.
Forth, in the operation of the crusher, when too much ore blocks the crushing cavity, do not stop the machine. You should stop feeding ore. You should regularly check the crushing cavity. Fifth, do not immediately stop the machine when the temperature of the bearing is too high. At this time, you should increase the amount of oil.
jaw crusher: http://www.milling-equipment.com/
stone crusher: http://www.crushing-mill.com/sand-crusher-machine.html
rabbit231 - 22. Nov, 06:31
