We all know that impact crusher is a piece of heavy construction equipment people can use to reduce the size of things like rock, waste concrete, and similar materials. The operator feeds chunks of material into the machine's hopper and it crushes them, turning the pieces into small chunks of a more uniform size. But have you known the single rotor impact crushing machine?

Motor through the v belt belt by the rotor high-speed rotation (680 r/min), crushed material from the body at the top of the inlet, through chain curtain, into the first crushing cavity (plate hammer and the first counterattack plate and chain curtain of space), being broken material fall within the scope of rotary plate hammer, impact of board hammer.After crushing material tangent direction of the high-speed moving along the plate hammer into the first counterattack plate, impact broken again.

Then, broken material and rebounded from the back plate to plate hammer, impact broken, for the third time and along the tangent of the hammer plate movement, high-speed retaliate board or the first paragraph to paragraph 2 plate, is the fourth time impact crushing between back plate and plate hammer (the second paragraph of the second crushing cavity). Until later continue to repeat the process of crushing material in impact crushing machine (http://www.hxjq-ballmill.com/pro/impact_crusher.html)crushing to Taiwan's granularity (particle size is smaller than the second paragraph counterattack plate and plate hammer smelling distance), and from the body below the discharging mouth eduction.It should be pointed out, back and forth movement of material in the way, and the material between the impact broken.

Inlet with the purpose of the chain curtain, is to prevent the outside material piece of flying out of the body.The ends of the rotor shaft bearing on both sides of the body positioning self-aligning roller bearing. Shaft through the two side of the body, to install the sealing device, to prevent dust in public.The body points up and down two parts. On the lower part of the body is located directly on the ground, the upper body to open three holes, for repair.The body wall may contact with the material, are covered by high manganese steel lining plate.

Single rotor impact crushing machine is made up of the body, plate hammer, rotor, back plate, curtain rod and chain, etc. Counterattack plate is divided into two sections.

Single rotor impact crushing machine is made up of : http://www.hxjq-ballmill.com/pro/impact_crusher.html